5 Tips to Help You Install a New Driveway

If you’ve just finished paving your driveway, you may be wondering about the different types of materials you can use. From Asphalt to concrete to paver stones and gravel, you’ll find useful tips for laying down any type of driveway. In addition to these five common materials, you should also consider the maintenance required for each type. In this article, we’ll discuss proper installation and maintenance of each material.

Asphalt

When installing a new asphalt driveway, there are a few important tips that will make the process run more smoothly. First, avoid driving heavy vehicles and heavy machinery over the new pavement. These activities will weaken the asphalt and can cause side support problems and cracking. Next, avoid driving on the newly-installed asphalt because this will cause a depression in the surface. Another tip is to park in random spots for the first six to twelve months to prevent any cracking.

Lastly, remember that asphalt is pliable and soft, and this will affect the installation process. That’s why it’s important to wait at least a few days before using your newly installed driveway. It’s important to note any concerns about local weather and contact a qualified contractor. If you are in an area that experiences high temperatures, it is best to schedule your new driveway installation during milder weather.

Concrete

When installing a new driveway, you should follow certain guidelines to ensure the material is durable and lasts for years. The first step is the concrete pour, which requires a team of several workers. As the wet concrete arrives from the ready-mix vendor, the crew fills in forms. Then, they smooth the surface. During the pour, make sure the finishing crew leaves enough spaces for expansion joints. These allow the slab to shift and break at controlled locations. Without them, the concrete slab will fracture randomly due to natural settling.

Once the formwork is ready, the next step is to pour the concrete. A skid steer with a front bucket is ideal for pouring concrete, but if you do not own one, you can rent a wheelbarrow. Once the concrete is poured, use a trowel to smooth it out and a leveller to make it level. Once the concrete is in place, you should add reinforcing mesh and rebar to strengthen the surface. If you are unsure of how much you need, you can also ask your contractor to help you with the project.

Paver stones

Before you lay the pavers on your new driveway, make sure to level the area first. Once the leveled area is flat, lay a flat piece of wood over the surface. Then, use a plate compactor to compact the material. Repeat the process once more over the entire area. When finished, lay the paver stones on top of the flat wooden base. Afterward, compact the material with a hand trowel.

Choosing the right material for your driveway is critical. You should choose a material that is able to withstand pressure without rotting. If you live in an area that receives frequent rain, you should opt for sand or gravel. Sand or gravel will help with drainage, but the driveway must be at least four inches deep. Without proper drainage, the stones will not stay in place well.

Gravel

Before you begin, you should understand what to expect from a gravel driveway. A gravel driveway consists of several layers. The bottom layer is a single, interlocking layer of six-inch stones. Next, you should compact the base layer with a roller or a car. The goal is to create a firm foundation for your gravel driveway. The top two layers will contain smaller stones. This final layer should be compacted with a compacting product.

One of the most important steps in the process of installing a gravel driveway is to make sure the driveway is level. Gravel driveways should be level, but if the surface has undulations, they should be accepted. Undulations cause your vehicle to bounce, which creates deeper and bigger problem areas. This article is written with gravel driveways in mind, but you can adapt it to fit your needs.